General Safety Instructions; Safety Instructions For The Operator; Electrical Equipment; Personnel Qualifications - WAGNER AquaCoat 5010 Translation Of The Original Operating Manual

Aircoat spraying system for non-fl ammable liquids
Table of Contents

Advertisement

EDITION 02/2016
OPERATING MANUAL
4

GENERAL SAFETY INSTRUCTIONS

4.1

SAFETY INSTRUCTIONS FOR THE OPERATOR

Keep this operating manual at hand near the device at all times.
Always follow local regulations concerning occupational safety and accident prevention.
4.1.1

ELECTRICAL EQUIPMENT

Electrical devices and equipment
To be provided in accordance with the local safety requirements with regard to the
operating mode and ambient infl uences.
May only be maintained by skilled electricians or under their supervision. With open
housings, there is a danger from line voltage.
Must be operated in accordance with the safety regulations and electrotechnical regulations.
Must be repaired immediately in the event of problems.
Must be decommissioned if they pose a hazard or are damaged.
Must be de-energized before work is commenced on active parts. Inform staff about
planned work. Observe electrical safety regulations.
Ground all devices to a common grounding point.
Only operate the device with a properly installed socket with a protective ground wire
connection.
Keep liquids away from electrical devices.
4.1.2

PERSONNEL QUALIFICATIONS

Ensure that the device is only operated, maintained and repaired by trained persons.
4.1.3

SAFE WORK ENVIRONMENT

Ensure that the fl oor in the working area is static dissipative in accordance with
EN 61340-4-1 (resistance must not exceed 100 megohms).
Paint mist extraction systems/ventilation systems must be fi tted on site according to
local regulations.
Ensure that product / air hoses adapted to the working pressure are used.
Ensure that personal protective equipment is available and is used (breathing and skin
protection).
Ensure that all persons within the working area wear static dissipative shoes. Footwear
must comply with EN 20344. The measured insulation resistance must not exceed
100 megohms.
Ensure that during spraying, persons wear static dissipative gloves. The grounding
takes place via the spray gun handle or the trigger guard.
ORDER NUMBER DOC 2366600
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aquacoat 5020

Table of Contents