Flushing And Cleaning The System - WAGNER AquaCoat 5010 Translation Of The Original Operating Manual

Aircoat spraying system for non-fl ammable liquids
Table of Contents

Advertisement

EDITION 02/2016
OPERATING MANUAL
Observe safety instructions in Chapter 4.
Incorrect maintenance/repair!
Danger to life and equipment damage.
8.1.3

FLUSHING AND CLEANING THE SYSTEM

Liquid in air tube!
Functional faults caused by swollen seals.
Discharge current to ground
Always point the spray gun down when cleaning.
Ensure that neither lacquers nor cleaning or fl ushing agent enters the air duct.
When taking a break from work or when stored for a longer period, the spray gun
should be positioned with the adapter pointing downwards.
ORDER NUMBER DOC 2366600
DANGER
Only a WAGNER service center or a suitably trained person may
carry out repairs and replace parts.
Only repair and replace parts that are listed in the "Spare parts"
chapter and that are assigned to the unit.
Before all work on the device and in the event of work interruptions:
- Switch off the energy supply and the compressed air supply.
- Relieve the pressure from the spray gun and device.
- Secure the spray gun against actuation.
Observe the operating and service manual for all work.
NOTICE
No high voltage.
B_03536
92

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aquacoat 5020

Table of Contents