MAnY tHAnkS fOr PlACinG YOur truSt in uS We would like to congratulate you on purchasing this brand product from Wagner; we are sure that you will enjoy working with it greatly. Please read the Operating Manual carefully and observe the safety information before starting the device.
Flexio 585 I-Spray 2. electrical Safety the tool plug must fit into the socket. the plug may not be modified in any form. Do not use adaptor plugs together with protective-earthed tools. Unmodified plugs and suitable sockets reduce the risk of an electric shock. Avoid physical contact with earthed surfaces such as pipes, heating elements, stoves and refrigerators.
Page 12
Flexio 585 I-Spray unexpected situations. Wear suitable clothing. Do not wear wide clothing or jewellery. keep your hair, clothes and gloves away from moving parts. Loose clothing, jewellery or long hair can be caught in moving parts. this device can be used by children over the age of 8 as well as by people with restricted physical, sensory or mental abilities or who have little experience or knowledge about it, providing they are supervised or instructed on how to use the device safely and what risks are involved.
Flexio 585 I-Spray if the supply cord is damaged, it must be replaced by the manufacturer or it’s service agent or a similarly qualified person in order to avoid a safety hazard. 3. Safety instructions for Spray Guns • Caution! Wear breathing equipment: Paint mist and solvent vapors are damaging to health.
1/2 hour. Eliminate the cause of heating, e.g. soiled air filter, slots for air intake covered. With original WAGner accessories and spare parts, you have the guarantee that all safety regulations are fulfilled. 4. Description/ Scope of delivery Description/ Scope of delivery (fig.
Flexio 585 I-Spray Interior wall paint (dispersions and latex WallPerfect (white) paint) All coating materials with the green Perfect Spray logo 6. Coating Materials Suitable for use Interior wall paint (dispersions and latex paint) Water- and solvent-based paints, finishes, primers, 2-component paints, clear finishes, automotive finishes, staining sealers and wood sealer-preservatives.
Flexio 585 I-Spray 9. Preparation of the Coating Material • Mix the material well in the original container. When using interior wall paint, an agitator is recommended. Flexio 585 has been developed for use with all conventional paints in their undiluted form.
Flexio 585 I-Spray 11. Selecting the Spray Setting (WallPerfect i-Spray spray attachment) WArninG! Danger of injury! never pull the trigger guard while adjusting the air cap. 2 different spray jet shapes can be set by turning the adjustment ring (fig. 4, 1) fig.
Flexio 585 I-Spray 14. Setting the Amount of Air (fig. 9) Depending on the viscosity of the material to be sprayed and the finish of the object to be coated, it may be advisable to vary the amount of air. Very low viscosity materials, such as watery glazes do not have to be atomised with the maximum amount of air.
Flexio 585 I-Spray "Cross spray" when using paint with a poor covering capacity or if the surface is highly absorbent (Fig. 11). • Interior wall paint in strong colour shades should be applied at least twice (allow first paint coat to dry first). This will ensure good coverage. 16.
Flexio 585 I-Spray 18. Cleaning the WallPerfect i-Spray spray attachment Screw of the container and empty it. Pull out the suction tub with container seal. CAutiOn! Never clean seals, diaphragm and nozzle or air holes of the spray gun with metal objects.
Flexio 585 I-Spray 19. Cleaning the Perfect Spray spray attachment Screw of the container and empty it. Pull out the suction tub with container seal. CAutiOn! Never clean seals, diaphragm and nozzle or air holes of the spray gun with metal objects.
Flexio 585 I-Spray Pull out the air filter and replace it if necessary, depending on how soiled it is. First, push the new air filter into the bottom part of the compartment. (Fig. 22) Next push it completely into the compartment. In order to push the air filter into the compartment completely, we recommend using the stirring rod.
For inaccessible places, such as radiators, cupboard corners, recesses 0417 915 etc. AUS (0417 925) Wallperfect i-spray spray attachment incl. 1800 ml container For processing interior wall paint and high-viscosity coating materials. 2326 477 further information about the WAGner range of products for renovating is available under www.wagner-group.com...
Flexio 585 I-Spray 23. Correction of Malfunctions Problem Cause remedy • No coating material Nozzle clogged Clean ➞ • emerges from the Feed tube clogged Clean ➞ • nozzle Material volume setting turned Turn to the right (+) ➞ too far to the left (-) •...
Flexio 585 I-Spray Problem Cause remedy • Poor covering Spray material is too cold The material you are ➞ capacity on the wall spraying should be at room temperature • Highly absorbent surface or paint Cross spray (Fig. 11) ➞ with poor covering capacity •...
Flexio 585 I-Spray necessary to specify safety measures to protect the operating personnel. These measures are based on an estimated shutdown during the actual conditions of use (all parts of the operating cycle are taken into consideration here, for example periods when the electric tool is switched off, and, when it is switched on but running without any load).
Page 27
Wearing parts are also excluded from the guarantee. The guarantee excludes commercial use. We expressly reserve the right to fulfil the guarantee. The guarantee expires if the tool is opened up by persons other than WAGNER service personnel. Transport damage, maintenance work and loss and damage due to faulty maintenance work are not covered by the guarantee.
EN 61000-3-2:2006+A1:2009+A2:2009; EN 61000-3-3:2008;EN 62233:2008 i.V. T. Jeltsch i. V. J. Ulbrich Senior Vice President Vice President Engineering Global Product Strategy & Planning Dokumentationsverantwortlicher Responsible person for documents Responsable de la documentation Documentatieverantwoordelijke J. Wagner GmbH Otto-Lilienthal-Str. 18 D-88677 Markdorf...