Processible Working Materials - WAGNER AquaCoat 5010 Translation Of The Original Operating Manual

Aircoat spraying system for non-fl ammable liquids
Table of Contents

Advertisement

EDITION 02/2016
OPERATING MANUAL
The device may only be operated under the following conditions:
The operating personnel must be trained on the basis of this operating manual.
The safety regulations listed in this operating manual must be observed.
The operating, maintenance and repair information in this operating manual must be
observed.
The statutory requirements and accident prevention regulation standards in the country
of use must be observed.
The electrostatic spray unit may only be operated if all parameters are set and all
measurements/safety checks are carried out correctly.
2.5

PROCESSIBLE WORKING MATERIALS

Water-dilutable lacquers are in principle divided into 3 groups:
Green
Non-fl ammable lacquers.
Yellow
Lacquers with low fl ammability.
Red
Flammable lacquers.
Only non-fl ammable (non-combustible) liquid spray products (green group) can be processed
with the present spray system. The specifi c resistance of the spray product must be between
0.5 kΩ cm and 1 MΩ cm.
The following recipe can be used to determine whether the product is non-fl ammable:
Where:
Weight percent
Water
Liquid organic phase; main components: Higher glycol esters in a mixture
with max. 1:1 of propanol.
Solid organic phase; main components: Binding agents and pigments.
Such lacquers behave like water in liquid form (liquid phase) and in sprayed form.
Thinners must also be non-fl ammable.
If the cleaning and fl ushing agents also align with this category, the system may be used.
Example of non-combustible liquid:
No more than 35 weight percent, 1:1 butylglycol/n-propanol, rest water.
Please contact your local WAGNER dealer and the lacquer manufacturer if you encounter
application problems.
ORDER NUMBER DOC 2366600
63
37
49
51
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aquacoat 5020

Table of Contents