WAGNER AquaCoat 5010 Translation Of The Original Operating Manual page 33

EDITION 02/2016
OPERATING MANUAL
6 Illuminated display "Spray current"
7 Push button: "High voltage"
For activating the function.
The high voltage is set with the control dial (2) and is indicated in the LED display (27).
- Adjusting range: 5–70 kV.
- Resolution: 1 kV.
8 Illuminated display "High voltage"
9 Regulator: "Pump pressure"
Pressure regulator for pump pressure.
- Adjusting range based on the pump ratio.
10 Regulator: "Product pressure"
The "product pressure" regulator is not operative for AirCoat systems.
11 Regulator: "Atomizing air"
Pressure regulator for air supply (shaping and atomizing air) to the spray gun.
- Adjusting range 0–1.0 MPa; 0–10 bar; 0–145 psi.
12 Pressure gauge: "Atomizing air"
Air pressure display for the spray gun.
- Display range 0–1.0 MPa; 0–10 bar; 0–145 psi.
13 Pressure gauge: "Product pressure"
The "product pressure" pressure gauge is not operable for AirCoat systems.
14 Pressure gauge: "Pump pressure"
Pressure display for the pump pressure.
- Display range 0–1.0 MPa; 0–10 bar; 0–145 psi.
The display is multiplied by the pump ratio:
- Puma 28-40
- Cobra 40-10
- EvoMotion 20-30
15 Push button "Recipe 1"
16 Illuminated display "Recipe 1"
Illuminates if recipe 1 is used.
17 Push button "Recipe 2"
18 Illuminated display "Recipe 2"
Illuminates if recipe 2 is used.
ORDER NUMBER DOC 2366600
Product pressure = display x 28
Product pressure = display x 40
Product pressure = display x 20
33