EDITION 02/2016
OPERATING MANUAL
1.4
ABBREVIATIONS
Order No. Order number
Spare part
Marking in the spare parts lists
AirCoat
AirCoat electrostatic, water-based
Manual gun
High voltage
HP
High pressure
Stainless steel
1.5
TERMINOLOGY FOR THE PURPOSE OF THIS MANUAL
Cleaning
Flushing
Staff qualifi cations
Trained person
Electrically trained
person
Electrician
Skilled person
In the context of
TRBS 1203
(2010 / Revision 2012)
ORDER NUMBER DOC 2366600
Manual cleaning of devices and device parts with cleaning agent
Internal fl ushing of paint-wetted parts with fl ushing agent
Is instructed in the tasks assigned to him/her, the potential risks
associated with improper behavior as well as the necessary
protective devices and measures.
Is instructed by an electrician about the tasks assigned to him/her,
the potential risks associated with improper behavior as well as
the necessary protective devices and measures.
Can assess the work assigned to him/her and detect possible
hazards based on his/her technical training, knowledge and
experience in relevant provisions.
A person who, based on his/her technical training, experience and
recent vocational experience, has suffi cient technical knowledge
and is familiar with the relevant and generally accepted rules of
technology so that he/she can inspect and assess the status of
devices and coating systems based on workplace safety.
Additional requirements for skilled persons are given in the
TRBS 1203 (2010/Revision 2012): Expert knowledge in the areas
of protection against excessive pressure, electrical hazards, and
explosion protection (where applicable).
Ultra high molecular weight polyethylene
PTFE with graphite
Position
Number of pieces
Wrench size
LV
Low viscosity
HV
High viscosity
9