Table of Contents
Advertisement
EDITION 02/2016
OPERATING MANUAL
2
CORRECT USE
2.1
DEVICE TYPE
Electrostatic spraying unit for manual coating of grounded work pieces using the AirCoat
process.
AquaCoat 5010/5020 systems are equipped with the AquaCoat 5010/5020 cabinet, the
VM 5020W control unit, a GM 5020EACW AirCoat spray gun and matching hose set, a
high-voltage generator, all safety devices and one of the following spray product supplies:
- Piston pump, Puma 28-40 PE/TG (in accordance with the spare parts catalog)
- Double diaphragm pump, Cobra 40-10 (in accordance with the spare parts catalog)
- Piston pump, EvoMotion 20-30 (in accordance with the spare parts catalog)
2.2
TYPE OF USE
AquaCoat 5010/5020 GM 5020EACW can be used to spray liquid, non-fl ammable products,
in particular non-fl ammable coating products in accordance with Chapter 2.5.
WAGNER forbids any other use!
2.3
USE IN AN EXPLOSION HAZARD AREA
The device is not suitable for use in potentially explosive areas.
(See Chapter 3.1 "CE Identifi cation".)
2.4
SAFETY PARAMETERS
The system may only be used as described in this operating manual. In particular, no
conversions are permitted on the system otherwise the warranty ceases to apply and
WAGNER is not liable for any claims.
WAGNER accepts no liability for any damage arising from incorrect use.
Use the device only to work with the products recommended by WAGNER.
Only operate the device as a whole.
Do not deactivate safety fi xtures.
Use only WAGNER original spare parts and accessories.
ORDER NUMBER DOC 2366600
10
Advertisement
Table of Contents
