Transportation; Assembly And Installation - WAGNER AquaCoat 5010 Translation Of The Original Operating Manual

Aircoat spraying system for non-fl ammable liquids
Table of Contents

Advertisement

EDITION 02/2016
OPERATING MANUAL
6.4

TRANSPORTATION

For underframe with rolls: The device can be moved on the rollers for short
distances.
Without underframe: The device can be transported using a pallet jack.
Use the recessed area on the underside of the cabinet for this purpose.
Inclined ground!
Risk of accidents if the device rolls away/falls.
6.5

ASSEMBLY AND INSTALLATION

Check the individual components of the AquaCoat spraying system against the
consignment note. Familiarize yourself with the mode of functioning of the individual
components, reading the enclosed operating manuals thoroughly. Note the special
requirements of the designated electrostatic AirCoat spray procedure.
ORDER NUMBER DOC 2366600
WARNING
Place the device on horizontal fl oor.
The wheels should be fi xed or replaced by levelling feet and
secured.
Do not tilt the device during shifting / transporting.
45

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aquacoat 5020

Table of Contents