Page 2
• Make sure network cables are properly seated. A clicking sound will be made when a cable is installed correctly. • If the power cord is damaged, do not attempt to connect the switch. Contact a Tripp Lite Service Representative for assistance.
Page 3
émis lorsqu’un câble est installé correctement. • Si le cordon d’alimentation est endommagé, ne pas tenter de connecter le commutateur. Contactez votre représentant(e) Tripp Lite pour obtenir de l’aide. • Ne jamais essayer d’installer ou d’utiliser le commutateur pendant un orage.
Page 4
Product Features Front Panel: Rear Panel: Gigabit Ethernet Ports: These 24 twisted-pair RJ-45 ports support auto-negotiable 10/100/1000 Mbps and auto MDI/MDIX cross-over detection functions for true “plug and play” capability. There are two green LEDs per RJ-45 port. The left LED blinks when the port is active.
Page 5
Quick Installation 1U Rackmount Installation Mount the switch using either the four cage nuts , washers and screws provided or four user-supplied rackmount screws . The user must determine the fitness of the rackmount screws to hold the unit in the rack before installation. Connect the switch to a properly grounded outlet.
Page 6
5-Year Limited Warranty TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of five (5) years from the date of initial purchase. TRIPP LITE’s obligation under this warranty is limited to repairing or replacing (at its sole option) any such defective products.
Need help?
Do you have a question about the NSU-G24C2 and is the answer not in the manual?
Questions and answers