4. In Version to upgrade with
Version to upgrade with, browse to locate and upload the firmware file
5. Verify the current and uploaded version of the firmware.
Verify the current and uploaded version of the firmware.
6. Click Start Upgrade.
The upgrade starts.
7. On upgrade completion, on the toolbar, click
completion, on the toolbar, click
A confirmation box appears
A confirmation box appears.
8. Click Yes.
The unit reboots. After about 30 seconds, the Login page appears.
The unit reboots. After about 30 seconds, the Login page appears.
Depending on the type of firmware upgrade, the following settings ma
Depending on the type of firmware upgrade, the following settings ma
Depending on the type of firmware upgrade, the following settings may be
erased: User settings, KVM switch settings, mouse and video adjustments
erased: User settings, KVM switch settings, mouse and video adjustments
erased: User settings, KVM switch settings, mouse and video adjustments, and
RS232 settings. The network settings remain intact.
to the firmware release notes.
to the firmware release notes.
Upgrading RICCs/ROCs
Upgrading RICCs/ROCs
3.13.3
You can upgrade the RICC/ROC
To upgrade firmware:
1. Download the firmware from
Download the firmware from the Support section of Minicom's website at:
http://www.minicom.com/.
http://www.minicom.com/.
2. Save the firmware file on the client computer.
Save the firmware file on the client computer.
Figure 34 – Device Version Upgrade Page
Figure
, browse to locate and upload the firmware file.
Figure 35 – Reboot Confirmation Page
Figure
The network settings remain intact. For more information
RICC/ROC firmware to take advantage of new features.
firmware to take advantage of new features.
Configuring the Network
Configuring
Performing Additional Configuration Operations
Additional Configuration Operations
.
For more information, refer
Minicom's website at:
User Guide | 43