Carburetor Solenoid; Testing The Carburetor Solenoid; Carburetor Solenoid Removal; Carburetor Solenoid Installation - Club Car Carryall 1500 Maintenance And Service Manual

ELECTRICAL COMPONENTS: GASOLINE
VEHICLES

CARBURETOR SOLENOID

See General Warnings, Section 1, Page 1-2.
The carburetor solenoid is located on the bottom of the carburetor.

TESTING THE CARBURETOR SOLENOID

See Test Procedure 27 – Carburetor Solenoid Circuit on page 11-31.

CARBURETOR SOLENOID REMOVAL

1. Disconnect battery and spark plug wire(s). See Disconnecting the Battery – Gasoline/Diesel Vehicles on
page 1-3.
2. Remove the front cover from the engine.
3. Disconnect the two-pin connector from the carburetor solenoid (Figure 13-3, Page 13-3).
4. Remove the solenoid from the carburetor. See the Kawasaki FH680D engine manual (CC P/N 103351201).
2128
Figure 13-3 Carburetor Solenoid Connector

CARBURETOR SOLENOID INSTALLATION

1. Install the carburetor solenoid and tighten to 168 in-lb (19 N·m). See the Kawasaki FH680D engine manual (CC
P/N 103351201).
2. Connect the two-pin connector to the carburetor solenoid (Figure 13-3, Page 13-3).
3. Install the engine front cover.
4. Connect battery and spark plug wire(s). See Connecting the Battery – Gasoline/Diesel Vehicles, Section
1, Page 1-4.
2015 Carryall 1500/1700 and XRT 1550 Maintenance and Service Manual
13
Carburetor Solenoid
Page 13-3