19
Cylinders
CYLINDERS
1. Pivot Pin 2. Retaining Pin 3. Cylinder (Lift and Lower) 4. Cylinder (Tilt Up and Tilt Down) 5. Green 6. Blue 7. Pink 8. No Color 9. Wire Ties
2253
VEHICLE MOUNTED CYLINDERS
Vehicle Mounted Cylinder Removal
1.
Relieve pressure in hydraulic system. See Relieving Hydraulic System Pressure on page 19-1.
2.
Set the joystick ON/OFF switch to OFF, remove driver seat and disable vehicle. See Disabling the Vehicle
on page 1-3.
3.
Disconnect battery. See Disconnecting the Battery – Gasoline/Diesel Vehicles, Section 1, Page 1-3.
4.
Thoroughly clean the cylinder, hose fittings and the area around them (Figure 19-37, Page 19-24).
5.
Mark hoses to ease reassembly and disconnect hoses from cylinders. Cover hoses and fittings to keep out debris.
6.
Remove retaining pin(s) and pivot pin(s) securing cylinder to chassis and remove cylinder (Figure 19-37, Page
19-24).
Page 19-24
2015 Carryall 1500/1700 and XRT 1550 Maintenance and Service Manual
1
3
Figure 19-37 Cylinders and Hoses
HYDRAULIC ATTACHMENT SYSTEM
2
5
7
6
8
4
9