Club Car Carryall 1500 Maintenance And Service Manual page 316

16
Fuel System
4. Remove the hex-head plastic thread screw (10) securing the black ground wire (6) to the fuel level sending unit
and remove the black ground wire. Retain the hardware.
5. Remove the four remaining hex-head plastic thread screws from the fuel level sending unit flange (5). Retain
the hardware.
6. Carefully remove the sending unit and gasket (3). Feed the rheostat arm and float (4) through the fuel tank hole.
Immediately place the fuel level sending unit in a pan to catch fuel. See following DANGER and NOTE.
DANGER
• Clean up any spilled fuel before operating the vehicle.
NOTE: The rheostat arm and float should be positioned toward the passenger's side surface of the fuel tank.
2153
Figure 16-10 Fuel Level Sending Unit Removal
Fuel Level Sending Unit Installation
DANGER
• Diesel fuel! Flammable! Explosive! Do not smoke. Keep sparks and flames away from the vehicle
and service area.
WARNING
• Do not use electrically powered tools to remove or install the fuel level sending unit. Failure to heed
this warning could result in a fire or explosion.
Page 16-12 2015 Carryall 1500/1700 and XRT 1550 Maintenance and Service Manual
9
10
6
3
DIESEL ENGINE, MUFFLER, FUEL SYSTEM,
AND CLUTCHES