Club Car Carryall 1500 Maintenance And Service Manual page 342

17
Front Differential
6. Remove both half shafts. See Half Shaft Removal on page 17-1.
7. Remove the lock nut and bolt securing the front driveshaft to the differential pinion shaft (Figure 17-9, Page 17-6).
8. Remove the vent tube from the differential housing (Figure 17-6, Page 17-4).
2198
Figure 17-6 Differential Vent Tube
9. Disconnect the electric clutch harness from the differential at the connector behind the splash guard (Figure
17-7, Page 17-4). See following NOTE.
NOTE: It may be necessary to open one or two splash guard fasteners to access the connector.
10. Remove the four flange-head bolts from the frame support weldments (Figure 17-8, Page 17-4). See following
NOTE.
NOTE: Do not remove the flange-head bolts from the differential plate and differential housing.
11. Pull the front differential and differential plate forward and out of the driveshaft. Tip the unit downward and
remove it from the vehicle. See following NOTE.
NOTE: It is not necessary to remove the differential from its mounting plate to repair or service the unit.
2199
Figure 17-7 Differential Clutch Connector
Page 17-4 2015 Carryall 1500/1700 and XRT 1550 Maintenance and Service Manual
2200
Figure 17-8 Front Differential Plate Bolts
DRIVETRAIN COMPONENTS