13
Carburetor Heater
CARBURETOR HEATER
See General Warnings, Section 1, Page 1-2.
The carburetor heater is located on top of the carburetor.
CARBURETOR HEATER REMOVAL
1.
Disconnect battery and spark plug wire(s). See Disconnecting the Battery – Gasoline/Diesel Vehicles on
page 1-3.
2.
Remove the top cover from the engine.
3.
Disconnect the green wire from the carburetor heater (1) (Figure 13-4, Page 13-4).
4.
Remove the heater from the carburetor.
2129
Figure 13-4 Carburetor Heater
CARBURETOR HEATER INSTALLATION
1.
Install the carburetor heater and tighten to 65 in-lb (7 N·m).
2.
Connect the green wire to the heater (Figure 13-4, Page 13-4).
3.
Install the engine top cover.
4.
Connect battery and spark plug wire(s). See Connecting the Battery – Gasoline/Diesel Vehicles, Section
1, Page 1-4.
Page 13-4
2015 Carryall 1500/1700 and XRT 1550 Maintenance and Service Manual
ELECTRICAL COMPONENTS: GASO-
LINE VEHICLES