Cylinder Assembly - Club Car Carryall 1500 Maintenance And Service Manual

19
Cylinders
2265
Figure 19-49 Remove Wiper Seal
14. Remove the piston seal from the piston (Figure 19-51, Page 19-30).
15. Remove the O-ring from the piston (Figure 19-52, Page 19-30).
2267
Figure 19-51 Remove Piston Seal
16. Wash the cylinder parts in clean solvent and dry with compressed air.
NOTE: While servicing the cylinder, do not damage the parts. Inspect for nicks, scratches or otherwise damaged or
bent parts before assembling the cylinder. Replace parts that appear damaged in any way. The cylinder may
not function correctly if there is damage to any of the parts.
17. Destroy all the O-rings and seals and replace them with NEW O-rings and seals.

CYLINDER ASSEMBLY

WARNING
• Wear safety glasses to prevent eye injury when any of the following conditions exist:
– Fluids are under pressure.
– Flying debris or loose material is present.
WARNING CONTINUED ON NEXT PAGE
Page 19-30 2015 Carryall 1500/1700 and XRT 1550 Maintenance and Service Manual
HYDRAULIC ATTACHMENT SYSTEM
2266
Figure 19-50 Remove Oil Seal
2268
Figure 19-52 Remove Piston O-ring