Club Car Carryall 1500 Maintenance And Service Manual page 393

HYDRAULIC ATTACHMENT SYSTEM
WARNING
– Engine is running.
– Tools are being used.
1. Install the O-ring on the piston (Figure 19-53, Page 19-31).
NOTE: Do not overstretch the seal.
2. Install the seal on the tool and stretch it until it fits the piston (Figure 19-54, Page 19-31). Allow the O-ring to
stretch for 30 seconds before removing it from the tool.
3. Install the seal on the piston (Figure 19-55, Page 19-32).
4. Use the ring compressor to compress the seal to the correct size (Figure 19-56, Page 19-32).
NOTE: Leave the piston in the ring compressor for three minutes.
2269
Figure 19-53 Install Piston O-ring
2015 Carryall 1500/1700 and XRT 1550 Maintenance and Service Manual
2270
Figure 19-54 Stretch Piston Seal
19
Cylinders
Page 19-31