Club Car Carryall 1500 Maintenance And Service Manual page 257

ELECTRICAL COMPONENTS: DIESEL VEHICLES
4. Place a belt tension gauge on the V-belt and use a pry bar to increase the belt tension. Use a Krikit brand belt
tension gauge to measure the belt tension. The belt tension adjustment for a new belt is 45 lb and the tension
adjustment for a used belt is 30 lb.
5. Hold the pry bar to maintain the proper belt tension adjustment and tighten the belt tension adjustment bolt to
19.0 ft-lb (25.8 N·m) (Figure 14-13, Page 14-16).
6. Tighten the alternator mounting bolt to 19.0 ft-lb (25.8 N·m) (Figure 14-14, Page 14-16). See following
CAUTION.
CAUTION
• Remove pry bar before starting engine.
7. Connect the 12-gauge blue fusible link to the alternator (Figure 14-12, Page 14-16). Tighten the nut to 84
in-lb (9.5 N·m).
8. Connect the 18-gauge purple wire to the alternator (Figure 14-11, Page 14-16).
9. Connect battery. See Connecting the Battery – Gasoline/Diesel Vehicles, Section 1, Page 1-4.
2015 Carryall 1500/1700 and XRT 1550 Maintenance and Service Manual
14
Alternator
Page 14-17