Current Subsystem - Chroma 63200A Series Operation & Programming Manual

Return Parameters: <CRD>, OFF, ON
Query Example:
4.3.2.4

CURRENT Subsystem

CURRent:STATic:L1
Type:
Description:
Setting Syntax:
Setting Parameters:Refer to respective specification for valid value range.
Setting Example:
Query Syntax:
Return Parameters:<NR2>, [Unit = Ampere]
Query Example:
CURRent:STATic:L2
Type:
Description:
Setting Syntax:
Setting Parameters:Refer to respective specification for valid value range.
Setting Example:
Query Syntax:
Return Parameters:<NR2>, [Unit = Ampere]
Query Example:
CURRent:STATic:RISE
Type:
Description:
Setting Syntax:
Setting Parameters:Refer to respective specification for valid value range.
Setting Example:
DIO:OUT2?
Channel-Specific
Set the static load current for constant current static mode.
CURRent:STATic:L1<space><NRf+>[suffix]
CURR:STAT:L1 20
CURR:STAT:L1 10A
CURR:STAT:L1 MAX
CURR:STAT:L1 MIN
CURRent:STATic:L1?[<space><MAX | MIN>]
CURR:STAT:L1?
CURR:STAT:L1? MAX
CURR:STAT:L1? MIN
Channel-Specific
Set the static load current for constant current static mode.
CURRent:STATic:L2<space><NRf+>[suffix]
CURR:STAT:L2 20
CURR:STAT:L2 10A
CURR:STAT:L2 MAX
CURR:STAT:L2 MIN
CURRent:STATic:L2?[<space><MAX | MIN>]
CURR:STAT:L2?
CURR:STAT:L2? MAX
CURR:STAT:L2? MIN
Channel-Specific
Set the rising slew rate of current for constant current static mode.
CURRent:STATic:RISE<space><NRf+>[suffix]
CURR:STAT:RISE 2.5
CURR:STAT:RISE 1A/μs
CURR:STAT:RISE MAX
[Unit = None]
Set the static load parameter L1 =
20A.
Set the static load parameter L1 =
10A.
Set the static load parameter L1 =
maximum value.
Set the static load parameter L1 =
minimum value.
Set the static load parameter L2 =
20A.
Set the static load parameter L2 =
10A.
Set the static load parameter L2 =
maximum value.
Set the static load parameter L2 =
minimum value.
Set rising slew rate to 2.5A/μs.
Set rising slew rate to 1A/μs.
Set rising slew rate to the
maximum value of static load.
Remote Operation
4-15