Chroma 63200A Series Operation & Programming Manual page 100

Query Syntax:
Return Parameters:<NR2>, [Unit = A/μs]
Query Example:
[ADVance:]IMPedance:STATic:CL
Type:
Description:
Setting Syntax:
Setting Parameters:<NRf+>, 30μF ~ 50,000μF, Resolution = 1uF, Unit = Farad
Setting Example:
Query Syntax:
Return Parameters:<NR2>, [Unit = Farad]
Query Example:
[ADVance:]IMPedance:STATic:LS
Type:
Description:
Setting Syntax:
Setting Parameters:<NRf+>, 0 ~ 20.0μH, Resolution = 0.1μH, Unit = Henry
Setting Example:
Query Syntax:
Return Parameters:<NR2>, [Unit = Henry]
Query Example:
[ADVance:]IMPedance:STATic:RS
Type:
Description:
Setting Syntax:
Setting Parameters:<NRf+>, 0.03Ω ~ 20.00Ω, Resolution = 0.01Ω, Unit = Ohm
Setting Example:
Query Syntax:
Return Parameters:<NR2>, [Unit = OHM]
Query Example:
[ADVance:]CURRent:SWEep:FALL?[<space><MAX | MIN>]
CURR:SWE:FALL?
CURR:SWE:FALL? MAX
CURR:SWE:FALL? MIN
Channel-Specific
Set the equivalent parallel load capacitance for constant impedance
mode.
[ADVance:]IMPedance:STATic:CL<space><NRf+>[suffix]
IMP:STAT:CL 0.02
IMP:STAT:CL 100μF
IMP:STAT:CL MAX
IMP:STAT:CL MIN
[ADVance:]IMPedance:STATic:CL?[<space><MAX | MIN>]
IMP:STAT:CL?
IMP:STAT:CL? MAX
IMP:STAT:CL? MIN
Channel-Specific
Set the equivalent series inductance for constant impedance mode.
[ADVance:]IMPedance:STATic:LS<space><NRf+>[suffix]
IMP:STAT:LS 0.00002
IMP:STAT:LS 1μH
IMP:STAT:LS MAX
IMP:STAT:LS MIN
[ADVance:]IMPedance:STATic:LS?[<space><MAX | MIN>]
IMP:STAT:LS?
IMP:STAT:LS? MAX
IMP:STAT:LS? MIN
Channel-Specific
Set the equivalent series resistance for constant impedance mode.
[ADVance:]IMPedance:STATic:RS<space><NRf+>[suffix]
IMP:STAT:RS 20
IMP:STAT:RS 10 OHM
IMP:STAT:RS MAX
IMP:STAT:RS MIN
[ADVance:]IMPedance:STATic:RS?[<space><MAX | MIN>]
IMP:STAT:RS?
IMP:STAT:RS? MAX
IMP:STAT:RS? MIN
Remote Operation
minimum value of static load.
Set capacitance = 20mF.
Set capacitance = 100μF.
Set capacitance = maximum value.
Set capacitance = minimum value.
Set inductance = 20μH.
Set inductance = 1μH.
Set inductance = maximum value.
Set inductance = minimum value.
Set resistance = 20Ω.
Set resistance = 10Ω.
Set resistance = maximum value.
Set resistance = minimum value.
4-37