Chroma 63200A Series Operation & Programming Manual page 123

High Power Electronic Load 63200A Series Operation & Programming Manual
STATus:CHANnel:ENABle
Type:
Description:
Setting Syntax:
Setting Parameters:<NR1>, 0 ~ 2
Setting Example:
Query Syntax:
Return Parameters:<NR1>
Query Example:
Return Example:
STATus:CHANnel:EVENt?
Type:
Description:
Query Syntax:
Return Parameters:<NR1>
Query Example:
Return Example:
STATus:CHANnel:PTRansition
Type:
Description:
Setting Syntax:
Setting Parameters:<NR1>, 0 ~ 2
Setting Example:
Query Syntax:
Return Parameters:<NR1>
Query Example:
Return Example:
STATus:CHANnel:NTRansition
Type:
Description:
Setting Syntax:
Setting Parameters:<NR1>, 0 ~ 2
Setting Example:
Query Syntax:
Return Parameters:<NR1>
Query Example:
Return Example:
STATus:CSUMmary:ENABle
Type:
Description:
4-60
Channel-Specific
Mask to select which bit in the Event register is allowed to be
summed into the corresponding channel bit for the Channel
Summary Event register.
STATus:CHANnel:ENABle<space><NR1>
32
-1, Unit = None
STAT:CHAN:ENABl 24
STATus:CHANnel:ENABle?
STAT:CHAN:ENAB?
24
Channel-Specific
Record all channel events that have occurred since last time the
register was read, and reset the Channel Event register.
STATus:CHANnel:EVENt?
STAT:CHAN:EVEN?
24
Channel-Specific
Programmable filters that determine 0-to-1 transition in the
Condition register will set the corresponding bit of the Event register.
STATus:CHANnel:PTRansition<space><NR1>
32
-1, Unit = None
STAT:CHAN:PTR 4
STATus:CHANnel:PTRansition?
STAT:CHAN:PTR?
4
Channel-Specific
Programmable filters that determine 1-to-0 transition in the
Condition register will set the corresponding bit of the Event register.
STATus:CHANnel:NTRansition<space><NR1>
32
-1, Unit = None
STAT:CHAN:NTR 4
STATus:CHANnel:NTRansition?
STAT:CHAN:NTR?
4
Channel-Specific
Mask to select which bit in the Channel Event register is allowed to
be summed into the CSUM (Channel Summary) bit for the Status
Byte register.
Return the contents of the Status
Channel Enable register.
Read and reset the Channel Event
register.
Set over current bit 2 from 0-to-1.
Set over current bit 2 from 1-to-0.