Chroma 63200A Series Operation & Programming Manual page 112

Setting Syntax:
Setting Parameters:Refer to respective specification for valid value range.
Setting Example:
Query Syntax:
Return Parameters:<NR2>, [Unit = Watt]
Query Example:
SPECification:TEST
Type:
Description:
Setting Syntax:
Setting Parameters:<NRf>, OFF(0), ON(1)
Setting Example:
Query Syntax:
Query Example:
Return Parameters:<CRD>, OFF, ON
SPECification:UNIT
Type:
Description:
Setting Syntax:
Setting Parameters:<NRf>, VALUE(1), PERCENT(0)
Setting Example:
Query Syntax:
Return Parameters:<CRD>, VALUE, PERCENT
Query Example:
SPECification:VOLTage:C
Type:
Description:
Setting Syntax:
Parameters:
Setting Example:
Query Syntax:
Return Parameters:<NR2>, [Unit = Volt]
Query Example:
SPECification:VOLTage:H
Type:
Description:
Setting Syntax:
Parameters:
Setting Example:
Query Syntax:
SPECification:POWer:L<space><NRf+>[suffix]
SPEC:POW:L 10
SPEC:POW:L 10mW
SPECification:POWer:H?[<space><MAX | MIN>]
SPEC:POW:L?
SPEC:POW:L? MAX
SPEC:POW:L? MIN
All Channels
Start or close the all channel specification test.
SPECification:TEST<space><NRf>
SPEC:TEST ON
SPEC:TEST 0
SPECification:TEST?
SPEC:TEST?
Channel-Specific
Set the specific entry mode.
SPECification:UNIT<space><NRf>
SPEC:UNIT VALUE
SPEC: UNIT 0
SPECification:UNIT?
SPEC:UNIT?
Channel-Specific
Set the center-level voltage specification. The -1 mean don't care.
SPECification:VOLTage:C<space><NRf+>[suffix]
Refer to respective specification for valid value range.
SPEC:VOLT:C 20
SPEC:VOLT:C 20mV
SPECification:VOLTage:C?[<space><MAX | MIN>]
SPEC:VOLT:C?
SPEC:VOLT:C? MAX
SPEC:VOLT:C? MIN
Channel-Specific
Set the high-level voltage specification. The -1 mean don't care.
SPECification:VOLTage:H<space><NRf+>[suffix]
Refer to respective specification for valid value range.
SPEC:VOLT:H 20
SPEC:VOLT:H 20mV
SPECification:VOLTage:H?[<space><MAX | MIN>]
Remote Operation
4-49