Table of Contents
Advertisement
High Power Electronic Load 63200A Series Operation & Programming Manual
2.4.3
Parallel Connection
Figure 2-4 illustrates how Electronic Load can be paralleled to increase power dissipation.
Electronic Loads can be directly paralleled in CC, CR, CV or CP mode.
2.5
Remote Control Connection
The remote operation of Load can be done through GPIB or USB interface. These
connectors on the rear panel connect the Load to computer. Connect the Remote Controller
to the Electronic Load before powering it on.
The GPIB interface of Electronic Load is an option for purchase.
2-6
Figure 2-4 Parallel Connection
Advertisement
Table of Contents
