Power Subsystem - Chroma 63200A Series Operation & Programming Manual

4.3.2.7

POWER Subsystem

POWer:STATic:L1
Type:
Description:
Setting Syntax:
Setting Parameters:Refer to respective specification for valid value range.
Setting Example:
Query Syntax:
Return Parameters:<NR2>, [Unit = Watt]
Query Example:
POWer:STATic:L2
Type:
Description:
Setting Syntax:
Setting Parameters:Refer to respective specification for valid value range.
Setting Example:
Query Syntax:
Return Parameters:<NR2>, [Unit = Watt]
Query Example:
POWer:STATic:RISE
Type:
Description:
Setting Syntax:
Setting Parameters:Refer to respective specification for valid value range.
Setting Example:
Query Syntax:
Return Parameters:<NR2>, [Unit = A/μs]
Query Example:
Channel-Specific
Set the static load power for constant power mode.
POWer:STATic:L1<space><NRf+>[suffix]
POW:STAT:L1 20
POW:STAT:L1 10W
POW:STAT:L1 MAX
POW:STAT:L1 MIN
POWer:STATic:L1?[<space><MAX | MIN>]
POW:STAT:L1?
POW:STAT:L1? MAX
POW:STAT:L1? MIN
Channel-Specific
Set the static load power for constant power mode.
POWer:STATic:L2<space><NRf+>[suffix]
POW:STAT:L2 20
POW:STAT:L2 10W
POW:STAT:L2 MAX
POW:STAT:L2 MIN
POWer:STATic:L2?[<space><MAX | MIN>]
POW:STAT:L2?
POW:STAT:L2? MAX
POW:STAT:L2? MIN
Channel-Specific
Set the rising slew rate of current for constant power mode.
POWer:STATic:RISE<space><NRf+>[suffix]
POW:STAT:RISE 2.5
POW:STAT:RISE 1A/μs
POW:STAT:RISE MAX
POW:STAT:RISE MIN
POWer:STATic:RISE?[<space><MAX | MIN>]
POW:STAT:RISE?
POW:STAT:RISE? MAX
POW:STAT:RISE? MIN
Remote Operation
Set the load parameter L1 = 20W.
Set the load parameter L1 = 10W.
Set the load parameter L1 = maximum
value.
Set the load parameter L1 = minimum
value.
Set the load parameter L2 = 20W.
Set the load parameter L2 = 10W.
Set the load parameter L2 = maximum
value.
Set the load parameter L2 = minimum
value.
Set rising slew rate to 2.5A/μs.
Set rising slew rate to 1A/μs .
Set rising slew rate to the
maximum value of load.
Set rising slew rate to the
minimum value of load.
4-25