Chroma 63200A Series Operation & Programming Manual page 75

High Power Electronic Load 63200A Series Operation & Programming Manual
Query Example:
CONFigure:PARAllel:INITial
Type:
Description:
Setting Syntax:
Setting Parameters: <CRD | NR1>, OFF(0), ON(1)
Setting Example:
Query Syntax:
Return Parameters:<CRD>, OFF(0), ON(1)
Query Example:
CONFigure:PARAllel:MODE
Type:
Description:
Setting Syntax:
Setting Parameters: <CRD | NR1>, NONE(0), MASTER(1), SLAVE(2)
Setting Example:
Query Syntax:
Return Parameters:<CRD>, NONE(0), MASTER(1), SLAVE(2) [Unit = None]
Query Example:
CONFigure:AUTO:ON
Type:
Description:
Setting Syntax:
Setting Parameters:<CRD | NR1>, OFF(0), ON(1)
Setting Example:
Query Syntax:
Return Parameters:<CRD>, OFF(0), ON(1) [Unit = None]
Query Example:
CONFigure:ENTer:KEY
Type:
Description:
Setting Syntax:
Setting Parameters: <CRD | NR1>, NEXT(0), FIXED(1)
Setting Example:
Query Syntax:
Return Parameters: <CRD>, NEXT(0), FIXED(1)
Query Example:
CONFigure:SHORt:KEY
Type:
Description:
Setting Syntax:
Setting Parameters: <CRD | NR1>, HOLD(0), TOGGLE(1) , DISABLE(2)
Setting Example:
4-12
CONF:SYNC:MODE?
All Channel
Set Load into/exit parallel mode.
CONFigure:PARAllel:INITial<space><CRD | NR1>
CONF:PARA:INIT ON
CONF:PARA:INIT 0
CONFigure:PARAllel:INITial?
CONF:PARA:INIT?
Channel-Specific
Set the parallel mode.
CONFigure:PARAllel:MODE<space><CRD | NR1>
CONF:PARA:MODE MASTER
CONF:PARA:MODE 0
CONFigure:PARAllel:MODE?
CONF:PARA:MODE?
Channel-Specific
Set the load module to perform auto load on during power-on.
CONFigure:AUTO:ON<space><CRD | NR1>
CONF:AUTO:ON ON
CONF:AUTO:ON 0
CONFigure:AUTO:ON?
CONF:AUTO:ON?
Channel-Specific
Set the action type of ENTER key.
CONFigure:ENTer:KEY<space><CRD | NR1>
CONF:ENT:KEY NEXT
CONF:ENT:KEY 1
CONFigure:ENTer:KEY?
CONF:ENT:KEY?
Channel-Specific
Set the action enable or disable of SHORT key.
CONFigure:SHORt:KEY<space><CRD | NR1>
CONF:SHOR:KEY DISABLE
Set Load to into parallel mode.
Set Load to exit parallel mode.
[Unit = None]
Set parallel mode to MASTER.
Set parallel mode to NONE.
Set auto load on state to ON.
Set auto load on state to OFF.
Set ENTER key function to NEXT.
Set ENTER key function to FIXED.
[Unit = None]
Set SHORT key function to
disable.