Chroma 63200A Series Operation & Programming Manual page 95

High Power Electronic Load 63200A Series Operation & Programming Manual
Query Syntax:
Return Parameters:<NR2>, [Unit = Watt]
Query Example:
[ADVance:]OPP:END
Type:
Description:
Setting Syntax:
Setting Parameters:Refer to respective specification for valid value range.
Setting Example:
Query Syntax:
Return Parameters:<NR2>, [Unit = Watt]
Query Example:
[ADVance:]OPP:STEP
Type:
Description:
Setting Syntax:
Setting Parameters:<NRf+>, 1 ~ 1000, Resolution = 1, Unit = None
Setting Example:
Query Syntax:
Return Parameters:<NR1>, [Unit = None]
Query Example:
[ADVance:]OPP:DWELl
Type:
Description:
Setting Syntax:
Setting Parameters:<NRf+>, 10μs ~ 1s Resolution = 10μs, Unit = Second
Setting Example:
Query Syntax:
Return Parameters:<NR2>, [Unit = Second]
Query Example:
4-32
OPP:STAR MAX
OPP:STAR MIN
[ADVance:]OPP:STARt?[<space><MAX | MIN>]
OPP:STAR?
OPP:STAR? MAX
OPP:STAR? MIN
Channel-Specific
Set end power for OPP test mode.
[ADVance:]OPP:END<space><NRf+>[suffix]
OPP:END 100
OPP:END 500mW
OPP:END MAX
OPP:END MIN
[ADVance:]OPP:END?[<space><MAX | MIN>]
OPP:END?
OPP:END? MAX
OPP:END? MIN
Channel-Specific
Set step count for OPP test mode.
[ADVance:]OPP:STEP<space><NRf+>
OPP:STEP 500
OPP:STEP MAX
OPP:STEP MIN
[ADVance:]OPP:STEP?[<space><MAX | MIN>]
OPP:STEP?
OPP:STEP? MAX
OPP:STEP? MIN
Channel-Specific
Set dwell time for OPP test mode.
[ADVance:]OPP:DWELl<space><NRf+>[suffix]
OPP:DWEL 0.5
OPP:DWEL 500ms
OPP:DWEL MAX
OPP:DWEL MIN
[ADVance:]OPP:DWELl?[<space><MAX | MIN>]
OPP:DWEL?
OPP:DWEL? MAX
OPP:DWEL? MIN
Set start power = maximum value.
Set start power = minimum value.
Set end power = 100W.
Set end power = 0.5W.
Set end power = maximum value.
Set end power = minimum value.
Set step count = 500.
Set step count = maximum value.
Set step count = minimum value.
Set off time = 0.5s.
Set off time = 0.5s.
Set off time = maximum value.
Set off time = minimum value.