Chroma 63200A Series Operation & Programming Manual page 94

[ADVance:]OCP:SPECification:L
Type:
Description:
Setting Syntax:
Setting Parameters:Refer to respective specification for valid value range.
Setting Example:
Query Syntax:
Return Parameters:<NR2>, [Unit = Ampere]
Query Example:
[ADVance:]OCP:LACTh
Type:
Description:
Setting Syntax:
Setting Parameters:<CRD | NR1>, OFF(0), ON(1)
Setting Example:
Query Syntax:
Return Parameters:<CRD>, OFF(0), ON(1)
Query Example:
[ADVance:]OCP:RESult?
Type:
Description:
Setting Syntax:
Setting Parameters:None
Setting Example:
Query Syntax:
Return Parameters:<arg1>,<arg2>,<arg3>
Query Example:
[ADVance:]OPP:STARt
Type:
Description:
Setting Syntax:
Setting Parameters:Refer to respective specification for valid value range.
Setting Example:
Channel-Specific
Set low level current of specification for OCP test mode.
[ADVance:]OCP:SPECification:L<space><NRf+>[suffix]
OCP:SPEC:L 0.5
OCP:SPEC:L 500mA
OCP:SPEC:L MAX
OCP:SPEC:L MIN
[ADVance:]OCP:SPECification:L?[<space><MAX | MIN>]
OCP:SPEC:L?
OCP:SPEC:L? MAX
OCP:SPEC:L? MIN
Channel-Specific
Set load latch function for OCP test mode.
[ADVance:]OCP:LATCh<space><CRD | NR1>
OCP:LATC OFF
OCP:LATC 1
[ADVance:]OCP:LATCh?
OCP:LATC?
Channel-Specific
Returns the result of OCP test function.
None
None
[ADVance:]OCP:RESult?
<arg1>: Pass/Fail. <NR1>, 0: PASS 1: FAIL [Unit = None]
<arg2>: OCP current. <NR2>, [Unit = Ampere]
<arg3>: Maximum power. <NR2>, [Unit = Watt]
When the returns are
-1,-1,-1 denotes OCP test is stop.
-2,-2,-2 denotes OCP test is ready to execute what wait for Von
or other condition.
-3,-3,-3 denotes OCP test is execute.
OCP:RES?
Channel-Specific
Set start power for OPP test mode.
[ADVance:]OPP:STARt<space><NRf+>[suffix]
OPP:STAR 100
OPP:STAR 500mw
Remote Operation
Set low level current = 0.5A.
Set low level current = 0.5A.
Set low level current = maximum
value.
Set low level current = minimum value.
Set latch = OFF
Set latch = ON
[Unit = None]
Set start power = 100W.
Set start power = 0.5W.
4-31