Chroma 63200A Series Operation & Programming Manual page 106

Setting Example:
Query Syntax:
Return Parameters:<NR2>, [Unit = OHM]
Query Example:
[ADVance:]AUTO:ISET
Type:
Description:
Setting Syntax:
Setting Parameters:Refer to respective specification for valid value range.
Setting Example:
Query Syntax:
Return Parameters:<NR2>, [Unit = Ampere]
Query Example:
[ADVance:]AUTO:PSET
Type:
Description:
Setting Syntax:
Setting Parameters:Refer to respective specification for valid value range.
Setting Example:
Query Syntax:
Return Parameters:<NR2>, [Unit = Watt]
Query Example:
[ADVance:]EXTernal:WAVeform:MODE
Type:
Description:
Setting Syntax:
Setting Parameters:<CRD | NR1>, CC(0), CR(1), CV(2)
Setting Example:
Query Syntax:
Return Parameters:<CRD>, CC(0), CR(1), CV(2)
Query Example:
AUTO:RSET 20
AUTO:RSET 10 OHM
AUTO:RSET MAX
AUTO:RSET MIN
[ADVance:]AUTO:RSET?[<space><MAX | MIN>]
AUTO:RSET?
AUTO:RSET? MAX
AUTO:RSET? MIN
Channel-Specific
Set the static load current in AUTO mode.
[ADVance:]AUTO:ISET<space><NRf+>[suffix]
AUTO:ISET 20
AUTO:ISET 10A
AUTO:ISET MAX
AUTO:ISET MIN
[ADVance:]AUTO:ISET?[<space><MAX | MIN>]
AUTO:ISET?
AUTO:ISET? MAX
AUTO:ISET? MIN
Channel-Specific
Set the static load power in AUTO mode.
[ADVance:]AUTO:PSET<space><NRf+>[suffix]
AUTO:PSET 20
AUTO:PSET 10W
AUTO:PSET MAX
AUTO:PSET MIN
[ADVance:]AUTO:PSET?[<space><MAX | MIN>]
AUTO:PSET?
AUTO:PSET? MAX
AUTO:PSET? MIN
Channel-Specific
Set run mode in external waveform mode.
[ADVance:]External:WAVeform:MODE<space><CRD | NR1>
BATT:MODE CC
BATT:MODE 2
[ADVance:]EXTernal:WAVeform:MODE?
EXT:WAV:MODE?
Remote Operation
Set the RSET = 20Ω.
Set the RSET = 10Ω.
Set the RSET = maximum value.
Set the RSET = minimum value.
Set the ISET = 20A.
Set the ISET = 10A.
Set the ISET = maximum value.
Set the ISET = minimum value.
Set the PSET = 20W.
Set the PSET = 10W.
Set the PSET = maximum value.
Set the PSET = minimum value.
Set run mode = CC
Set run mode = CV
[Unit = None]
4-43