Table of Contents
Advertisement
2.6
Maintenance & Cleaning
Unplug the power cord of the hardware device first before cleaning. Use a brush to clean
the dust on it. Use volatile liquid (such as Cleaning Naphtha) to clean the stain on the
chassis if it cannot be brushed off. Do not wipe the chassis with any corrosive liquid to
avoid damaging the case. Please use a slightly damp cloth to clean the front panel display.
For internal cleaning, please use a low-pressure air gun to clean the dust inside the device
or send it back to the distributors or agents of Chroma for cleaning.
*It is recommended to clean the device regularly once a year.
2.7
Calibration & Verification
Be sure to verify the device accuracy half a year on a regular basis. The verification
procedures are described in Chapter 6. If repair service is required for the 63200A or out of
specification, be sure to contact the sales distributors and service location worldwide listed in
Chroma's web page http://www.chromaate.com/english/contact/default.asp.
Installation
2-7
Advertisement
Table of Contents
