Table of Contents
Advertisement
3.2.2
HOTKEY
Changing the HOTKEY
Press the HOTKEY for 2~3 seconds to switch the HOTKEY to the current loading mode and
the HOTKEY display will change as well.
It can set the frequently used mode as a HOTKEY to facilitate operation.
3.2.3
Function Keys
Name
A/B
It switches the load to A and B two types. A yellow indicator is located on
the left of the function key.
RANGE
It switches the loading mode range through the cycle of H/M/L.
MODE
The menu for basic loading modes.
EXTEND
It is used when working with extended load. A green indicator is located on
the left of the function key.
CONFIG/
It configures the function by setting up the parameters. It can also return to
LOCAL
local control when in remote mode.
EDIT
The parameter editing function.
SHORT
It simulates the short circuit function. A red indicator is located on the left
of the function key.
ADVA
The menu for advanced functions.
EXIT
It returns to the setup in previous level and exits the parameter input status.
SHIFT
It can execute the SHIFT composite function keys. A blue indicator is
located on the left of the function key.
LOAD
The loading and unloading function key. The key has a blue indicator
located on the right.
To enable the SHIFT composite function, press SHIFT first and the mapping function key.
Name
LOCK
It locks and unlocks the function. Any input is prohibited when lock is
enabled.
Table 3-2 Function Keys Description
Table 3-3 SHIFT Composite Function Keys
Description
Description
Operation Overview
3-3
Advertisement
Table of Contents
