Chroma 63200A Series Operation & Programming Manual page 96

[ADVance:]OPP:TRIGger:VOLTage
Type:
Description:
Setting Syntax:
Setting Parameters:Refer to respective specification for valid value range.
Setting Example:
Query Syntax:
Return Parameters:<NR2>, [Unit = Volt]
Query Example:
[ADVance:]OPP:SPECification:H
Type:
Description:
Setting Syntax:
Setting Parameters:Refer to respective specification for valid value range.
Setting Example:
Query Syntax:
Return Parameters:<NR2>, [Unit = Watt]
Query Example:
[ADVance:]OPP:SPECification:L
Type:
Description:
Setting Syntax:
Setting Parameters:Refer to respective specification for valid value range.
Setting Example:
Query Syntax:
Return Parameters:<NR2>, [Unit = Watt]
Query Example:
[ADVance:]OPP:LACTh
Type:
Description:
Setting Syntax:
Setting Parameters:<CRD | NR1>, OFF(0), ON(1)
Setting Example:
Query Syntax:
Channel-Specific
Set trigger voltage for OPP test mode.
[ADVance:]OPP:TRIGger:VOLTage<space><NRf+>[suffix]
OPP:TRIG:VOLT 0.5
OPP:TRIG:VOLT 500mV
OPP:TRIG:VOLT MAX
OPP:TRIG:VOLT MIN
[ADVance:]OPP:TRIGger:VOLTage?[<space><MAX | MIN>]
OPP:TRIG:VOLT?
OPP:TRIG:VOLT? MAX
OPP:TRIG:VOLT? MIN
Channel-Specific
Set high level power of specification for OPP test mode.
[ADVance:]OPP:SPECification:H<space><NRf+>[suffix]
OPP:SPEC:H 0.5
OPP:SPEC:H 500mW
OPP:SPEC:H MAX
OPP:SPEC:H MIN
[ADVance:]OPP:SPECification:H?[<space><MAX | MIN>]
OPP:SPEC:H?
OPP:SPEC:H? MAX
OPP:SPEC:H? MIN
Channel-Specific
Set low level power of specification for OPP test mode.
[ADVance:]OPP:SPECification:L<space><NRf+>[suffix]
OPP:SPEC:L 0.5
OPP:SPEC:L 500mW
OPP:SPEC:L MAX
OPP:SPEC:L MIN
[ADVance:]OPP:SPECification:L?[<space><MAX | MIN>]
OPP:SPEC:L?
OPP:SPEC:L? MAX
OPP:SPEC:L? MIN
Channel-Specific
Set load latch function for OPP test mode.
[ADVance:]OPP:LATCh<space><CRD | NR1>
OPP:LATC OFF
OPP:LATC 1
[ADVance:]OPP:LATCh?
Set trigger voltage = 0.5V.
Set trigger voltage = 0.5V.
Set trigger voltage = maximum value.
Set trigger voltage = minimum value.
Set high level power = 0.5W.
Set high level power = 0.5W.
Set high level power = maximum value.
Set high level power = minimum value.
Set low level power = 0.5W.
Set low level power = 0.5W.
Set low level power = maximum value.
Set low level power = minimum value.
Set latch = OFF
Set latch = ON
Remote Operation
4-33