Chroma 63200A Series Operation & Programming Manual page 87

High Power Electronic Load 63200A Series Operation & Programming Manual
Query Syntax:
Return Parameters:<NR2>, [Unit = Volt]
Query Example:
VOLTage:STAT:ILIMit
Type:
Description:
Setting Syntax:
Setting Parameters:Refer to respective specification for valid value range.
Setting Example:
Query Syntax:
Return Parameters:<NR2>, [Unit = Ampere]
Query Example:
VOLTage:STATic:RESponse
Type:
Description:
Setting Syntax:
Setting Parameters:<NRf>, SLOW(0), NORMAL(1), FAST(2)
Example:
Query Syntax:
Return Parameters:<CRD>, SLOW(0), NORMAL(1), FAST(2)
Query Example:
VOLTage:STATic:IRNG
Type:
Description:
Setting Syntax:
Setting Parameters:<CRD | NR1>, LOW | L | 0, MIDDLE | M | 1, HIGH | H | 2
Setting Example:
Query Syntax:
Return Parameters:<CRD>, LOW(0), MIDDLE(1), HIGH(2)
Query Example:
4-24
VOLT:STAT:L2 24V
VOLT:STAT:L2 MAX
VOLT:STAT:L2 MIN
VOLTage:STATic:L2?[<space><MAX | MIN>]
VOLT:STAT:L2?
VOLT:STAT:L2? MAX
VOLT:STAT:L2? MIN
Channel-Specific
Set the current limit for constant voltage mode.
VOLTage:STATic:ILIMit<space><NRf+>[suffix]
VOLT:STAT:ILIM 3
VOLT:STAT:ILIM MAX
VOLT:STAT:ILIM MIN
VOLTage:STATic:ILIMit?[<space><MAX | MIN>]
VOLT:STAT:ILIM?
VOLT:STAT:ILIM? MAX
VOLT:STAT:ILIM? MIN
Channel-Specific
Set the response speed in constant voltage mode.
VOLTage:STATic:RESponose<space><NRf>
VOLT:STAT:RES FAST
VOLT:STAT:RES SLOW
VOLTage:STATic:RESponse?
VOLT:STAT:RES?
Channel-Specific
Set the current measurement range in constant voltage mode.
VOLTage:STATic:IRNG<space><CRD | NR1>
VOLT:STAT:IRNG HIGH
VOLT:STAT:IRNG M
VOLT:STAT:IRNG 0
VOLTage: STATic: IRNG?
VOLT:STAT:IRNG?
Set voltage of load L2 as 24V.
Set voltage of load L2 as the
maximum value.
Set voltage of load L2 as the minimum
value.
Set the current limit to 3A in
constant voltage mode.
Set the current limit to the
maximum value in constant
voltage mode.
Set the current limit to the
minimum value in constant
voltage mode.
Set current range to High.
Set current range to Middle.
Set current range to Low.
[Unit = None]