Vfd - Chroma 63200A Series Operation & Programming Manual

High Power Electronic Load 63200A Series Operation & Programming Manual
Item Name
1 Power switch
2

VFD

3 HOTKEY
4 FUNCTION keys
5 Entry keys
6 Arrow keys
7 Push Button Rotary
8 USB HOST
3.2.1 VFD
The loading mode is displayed as below:
1. Parameter setting lines: The setting parameters of each mode.
2. Reading display: It displays the measured voltage (V) & current (I) & power (W).
3. Status line: It shows the mode, range, Load ON, Short ON and Von status.
4. Up & down scroll: When a down arrow appears, it means there are parameters in the
next page for setting.
5. HOTKEY: The shortcut for entering the mapped loading mode.
HOTKEY
There are 4 HOTKEYS that can switch the loading mode rapidly. When in a loading mode
(such as basic or Advance mode), simply press a HOTKEY can switch to the mode indicated.
3-2
Table 3-1 Front Panel Description
Description
The AC power switch of Electronic Load.
The display shows the setting information.
The shortcut keys for switching loading modes.
There are A/B, RANGE, MODE, EXTEND, LOCK,
Config/Local, EDIT, SPEC, Short, Recall, Adva,
Save and Clear keys.
The numeric keys and ENTER key.
These two keys are used to change the setting
page and select the desired form. They are also
used to move the cursor to the desired position
when editing parameters.
Press down the push button rotary to enter into the
parameter setting page. When the settings are
done, press the push button rotary again to confirm
the setting.
USB HOST (not fully support yet).
Refer to
3.2.1
3.2.2
3.2.3
3.2.4
3.2.4