Chroma 63200A Series Operation & Programming Manual page 121

High Power Electronic Load 63200A Series Operation & Programming Manual
PROGram:SEQuence:CLEar
Type:
Description:
Setting Syntax:
Setting Parameters:<NR1>, 1 ~ 10, Resolution = 1, Unit = None
Setting Example:
Query Syntax:
Return Parameters:None
Query Example:
PROGram:SEQuence:FAIL?
Type:
Description:
Setting Syntax:
Setting Parameters:None
Query Syntax:
Return Parameters:<aard>, xx-xxx,xx-xxx,xx-xxx...etc, which front of "-" is the program
Query Example:
Return Example:
PROGram:SEQuence:REMain
Type:
Description:
Setting Syntax:
Setting Parameters:None
Query Syntax:
Return Parameters:<NR1>
Query Example:
PROGram:SEQuence:SPECification?
Type:
Description:
Setting Syntax:
Setting Parameters:None
Query Syntax:
Return Parameters: <DLABRD>, for example: when the 12 sequences in program 1,
4-58
Channel-Specific
Clear all sequence in program file what specified.
PROGram:SEQuence:CLEar<space><NR1>
PROG:SEQ:CLE 3
None
None
Channel-Specific
This command returns the fail of sequence in specification.
None
PROGram:SEQuency:FAIL?
number and rear of "-" is the sequence number.
PROG:SEQ:FAIL?
1-2,5-13,10-8
Channel-Specific
This command returns the remains sequence of unused.
None
PROGram:SEQuency:REMain?
PROG:SEQ:REM?
Channel-Specific
This query returns the specification of program sequence from the
DC Electronic Load in binary format. The specification either
voltage、current or power are consist of total sequences in program
file that user specified in format of 32bits float point.
None
PROGram:SEQuency:SPECification?<space><Arg1>,<Arg2>
Selects a program:
Arg1: <NR1>, 1 ~ 10, Resolution = 1, Unit = None.
Selects a parameter of measurement:
Arg2: <NRf>, V(0), I(1), P(2), Unit = None.
than the return will be the format show in below.