3.
If the operating voltage exceeds the rated voltage for 1.1 times, it
would cause permanent damage to the device.
4.
Please refer to user's manual for detail specifications, and S
(siemens) is the SI unit of conductance, equal to one reciprocal
ohm
5.
Power F.S. = Vrange F.S. × Irang F.S.
6.
The specification is valid only for loading current >20A.
7.
The measured maximum noise is tested under the condition of
40°C ambient temperature with full power for 5 minutes and 1
meter away from the frame.
8.
The short circuit function is to simulate full power loading and is
unable to do mechanical short circuit.
Overview
1-5