Chroma 63200A Series Operation & Programming Manual page 92

[ADVance:]SINE:FREQuency
Type:
Description:
Setting Syntax:
Setting Parameters:<NRf+>, 0.01Hz ~ 20000.00Hz, Resolution = 0.01Hz, Unit = Hertz
Setting Example:
Query Syntax:
Return Parameters:<NR2>, [Unit = Hertz]
Query Example:
[ADVance:]OCP:STARt
Type:
Description:
Setting Syntax:
Setting Parameters:Refer to respective specification for valid value range.
Setting Example:
Query Syntax:
Return Parameters:<NR2>, [Unit = Ampere]
Query Example:
[ADVance:]OCP:END
Type:
Description:
Setting Syntax:
Setting Parameters:Refer to respective specification for valid value range.
Setting Example:
Query Syntax:
Return Parameters:<NR2>, [Unit = Ampere]
Query Example:
[ADVance:]OCP:STEP
Type:
Description:
Setting Syntax:
Setting Parameters:<NRf+>, 1 ~ 1000, Resolution = 1, Unit = None
Setting Example:
Channel-Specific
Set frequency for sine wave dynamic mode.
[ADVance:]SINE:FREQuency<space><NRf+>[suffix]
SINE:FREQ 1000
SINE:FREQ 1kHz
SINE:FREQ MAX
SINE:FREQ MIN
[ADVance:]SINE:FREQuency?[<space><MAX | MIN>]
SINE:FREQ?
SINE:FREQ? MAX
SINE:FREQ? MIN
Channel-Specific
Set start current for OCP test mode.
[ADVance:]OCP:STARt<space><NRf+>[suffix]
OCP:STAR 0.5
OCP:STAR 500mA
OCP:STAR MAX
OCP:STAR MIN
[ADVance:]OCP:STARt?[<space><MAX | MIN>]
OCP:STAR?
OCP:STAR? MAX
OCP:STAR? MIN
Channel-Specific
Set end current for OCP test mode.
[ADVance:]OCP:END<space><NRf+>[suffix]
OCP:END 0.5
OCP:END 500mA
OCP:END MAX
OCP:END MIN
[ADVance:]OCP:END?[<space><MAX | MIN>]
OCP:END?
OCP:END? MAX
OCP:END? MIN
Channel-Specific
Set step count for OCP test mode.
[ADVance:]OCP:STEP<space><NRf+>
OCP:STEP 500
OCP:STEP MAX
Remote Operation
Set frequency = 1kHz.
Set frequency = 1kHz.
Set frequency = maximum value.
Set frequency = minimum value.
Set start current = 0.5A.
Set start current = 0.5A.
Set start current = maximum value.
Set start current = minimum value.
Set end current = 0.5A.
Set end current = 0.5A.
Set end current = maximum value.
Set end current = minimum value.
Set step count = 500.
Set step count = maximum value.
4-29