Description:
Setting Syntax:
Setting Parameters: None
Setting Example:
SYSTem:LOCal
Type:
Description:
Setting Syntax:
Setting Parameters: None
Setting Example:
This command can only be used under control of USB and Ethernet.
If SYST:REM is programmed, the 63200A will be set in the
REMOTE state, and the front panel of frame will be disabled except
the <LOCAL>key pressed.
SYSTem:REMote
SYST:REM
All Channels
This command can only be used under control of USB and Ethernet.
If SYST:LOC is programmed, the 63200A will be set in the LOCAL
state, and the front panel will work.
SYSTem:LOCal
SYST:LOC
Remote Operation
4-63