Chroma 63200A Series Operation & Programming Manual page 80

Query Example:
CURRent:DYNamic:L2
Type:
Description:
Setting Syntax:
Setting Parameters:Refer to respective specification for valid value range.
Setting Example:
Query Syntax:
Return Parameters:<NR2>, [Unit = Ampere]
Query Example:
CURRent:DYNamic:T1
Type:
Description:
Setting Syntax:
Setting Parameters:<NRf+>, 10μs ~ 100s, Resolution = 10μs, Unit = Second
Setting Example:
Query Syntax:
Return Parameters:<NR2>, [Unit = Second]
Query Example:
CURRent:DYNamic:T2
Type:
Description:
Setting Syntax:
Setting Parameters:<NRf+>, 10μs ~ 100s, Resolution = 10μs, Unit = Second
Setting Example:
Query Syntax:
CURR:DYN:L1?
CURR:DYN:L1? MAX
CURR:DYN:L1? MIN
Channel-Specific
Set the load current during T2 period for constant current dynamic
mode.
CURRent:DYNamic:L2<space><NRf+>[suffix]
CURR:DYN:L2 20
CURR:DYN:L2 10A
CURR:DYN:L2 MAX
CURR:DYN:L2 MIN
CURRent:DYNamic:L2?[<space><MAX | MIN>]
CURR:DYN:L2?
CURR:DYN:L2? MAX
CURR:DYN:L2? MIN
Channel-Specific
Set duration parameter T1 for constant current dynamic mode.
CURRent:DYNamic:T1<space><NRf+>[suffix]
CURR:DYN:T1 10ms
CURR:DYN:T1 2
CURR:DYN:T1 MAX
CURR:DYN:T1 MIN
CURRent:DYNamic:T1?[<space><MAX | MIN>]
CURR:DYN:T1?
CURR:DYN:T1? MAX
CURR:DYN:T1? MIN
Channel-Specific
Set duration parameter T2 for constant current dynamic mode.
CURRent:DYNamic:T2<space><NRf+>[suffix]
CURR:DYN:T2 10ms
CURR:DYN:T2 2
CURR:DYN:T2 MAX
CURR:DYN:T2 MIN
CURRent:DYNamic:T2?[<space><MAX | MIN>]
Set the dynamic load parameter
L2 = 20A.
Set the dynamic load parameter
L2 = 10A.
Set the dynamic load parameter
L2 = maximum value.
Set the dynamic load parameter
L2 = minimum value.
Set the dynamic duration T1 = 10ms.
Set the dynamic duration T1 = 2s.
Set the dynamic duration T1 as
maximum value.
Set the dynamic duration T1 as
minimum value.
Set the dynamic duration T2 = 10ms.
Set the dynamic duration T2 = 2s.
Set the dynamic duration T2 as
maximum value.
Set the dynamic duration T2 as
minimum value.
Remote Operation
4-17