Table of Contents
Advertisement
The Management Interface
The Management Interface (MI) is a computer interface used to administer and configure the EXTender
7000 and PBXgateway II. Detailed instructions for using the MI can be found in the EXTender 7000 User's
Guide.
1. Press Enter and the Welcome Screen of the Management Interface (MI) will appear.
Figure 2-8: MI Welcome Screen
IMPORTANT TERMINAL SETTINGS
The MI requires a screen size of 24 lines X 80 columns. Make sure the Welcome Screen is bordered on all
four sides with a # symbol, as shown in the figure above.
To enlarge the screen (within the VT-100 application)
Click any corner of the screen.
Drag the screen to enlarge.
Check that the screen is bordered by "#" symbols.
2. Press any key to continue. The Main Menu will appear.
3. If you are already familiar with using the MI, proceed to the User's Guide for information on setting the
parameters for the different network environments.
OR
4. Press F1 for the MI Help Screen, which provides basic information for navigating through the interface.
TM
EXTender
7000 Installation Guide
Page 23
Advertisement
Table of Contents
