Figure 1.8 Host Interface For Fc Cable Connections (4Port) - Fujitsu Storage ETERNUS AF650 S2 Basic Operation Manual

Chapter 1 Component Names and LED Names
1.1 Controller Enclosures
■
Host Interfaces
A host interface is a board that has interface ports to connect a controller to the server.
Figure 1.8 and
●
Host Interface (for FC Cable Connections) (4port)
The ports on the host interface are used for connecting a controller to a server with an FC cable. There is one
type of 4port host interface for FC cable connections: FC 16Gbit/s.

Figure 1.8 Host Interface for FC cable connections (4port)

1 2
4 5
1. CA READY LED
2. CA FAULT LED
3. LINK/FAULT LED
4. Host Interface Port #0
5. Host Interface Port #1
6. Host Interface Port #2
7. Host Interface Port #3
●
Host Interface (for FC Cable Connections) (2port)
The ports on the host interface are used for connecting a controller to a server with an FC cable. There are
three types of 2port host interfaces for FC cable connections: FC 32Gbit/s, FC 16Gbit/s, and iSCSI 10Gbit/s.
The following figure shows an example of when the host interface is FC.
Figure 1.9 Host Interface for FC Cable Connections (2port, Equipped with SFP+ Modules in All Ports)
1 2 3
4 5
1. CA READY LED
2. CA FAULT LED
3. LINK/FAULT LED
4. Host Interface Port #0
5. Host Interface Port #1
Figure 1.9 show host interfaces.
3
6 7
FUJITSU Storage ETERNUS AF650 S2, ETERNUS AF650 All-Flash Arrays Operation Guide (Basic)
Copyright 2017 FUJITSU LIMITED
Table 1.4 shows the status and meanings of each LED.
18
P3AG-1932-04ENZ0