Ferrules - Xe2/Xp2/Xm2/800-1818/800-1819/800-1887; Ferrules - Xe2/Xp2/Xm2/800-1819 - Copley Controls Xenus Plus Series User Manual

Xenus Plus User Guide
Ferrules –
4.6:
AC POWER, REGEN AND MOTOR OUTPUTS: J1~J4
Wago MCS-MIDI Classic: 231-305/107-000 (J1) 231-303/107-000 (J2),
231-304/107-000 (J3, J4), female connector; with screw flange;
pin spacing 5.08 mm / 0.2 in
Conductor capacity
Bare stranded: AWG 28~14 [0.08~2.5 mm2]
Insulated ferrule: AWG 24~16 [0.25~1.5 mm2]
Stripping length: 8~9 mm
Operating Tool: Wago MCS-MIDI Classic: 231-291
2
AWG mm Color
14 2.5 Blue
16 1.5 Black
18 1.0 Red
0.75 Gray
22 0.5 White
NOTES
PNUM = Part Number
SL = Stripping length
Dimensions: mm (in)
24V & BRAKE: J5
Wago MCS-MINI: 734-105/107-000, female connector; with screw flange,
pin spacing 3.5 mm / 0.138 in
Conductor capacity
Bare stranded:
Insulated ferrule:
Stripping length:
Operating tool:
FERRULE PART NUMBERS: SINGLE-WIRE INSULATED
2
AWG mm Color
18 1.0 Red
20 0.75 Gray
22 0.5 White
FERRULE PART NUMBERS: DOUBLE-WIRE INSULATED
2
AWG mm Color
2 x 18 2 x 1.0 Red
2 x 18 2 x 1.0 Gray
2 x 20 2 x 0.75 White
2 x 20 2 x 0.75 Gray
2 x 22 2 x 0.50 White
SINGLE WIRE
Copley Controls
XE2/XP2/XM2/800-1818/800-1819/800-1887
Mfgr PNUM A
Wago 216-206 15.0 (0.59)
Wago 216-204 14.0 (0.59
Wago 216-223 12.0 (.47)
Wago 216-222 12.0 (.47)
Wago 216-221 12.0 (.47)
AWG 28~16 [0.08~1.5 mm2]
AWG 24~16 [0.25~1.5 mm2]
0.24~0.28 in[6~7 mm]
Wago MCS-MINI: 734-191
Mfgr PNUM
Wago 216-223 12.0 (.47)
Wago 216-222 12.0 (.47)
Wago 216-221 12.0 (.47)
Mfgr PNUM
Altech 2776.0
Altech 2775.0
Altech 2794.0
TE 966144-2
TE 966144-1
J1
B C
8.0 (0.31) 2.05 (.08)
8.0 (0.31) 1.7 (.07)
6.0 (.24) 1.4 (.055)
6.0 (.24) 1.2 (.047)
6.0 (.24) 1.0 (.039)
A B C
6.0 (.24) 1.4 (.06)
6.0 (.24) 1.2 (.05)
6.0 (.24) 1.0 (.04)
A B
15.4 (.61) 8.2 [.32] 2.4 (.09)
14.6 (.57) 8.2 (.32) 2.0 (.08)
14.6 (.57) 8.2 (.32) 1.7 (.07)
15.0 (.59) 8.0 (.31) 1.70 (.07)
15.0 (.59) 8.0 (.31) 1.40 (.06)
DOUBLE WIRE
16-01344 Rev 06
J3, J4
J2
D E
4.2 (0.17) 4.8 (0.19)
3.5 (0.14) 4.0 (0.16)
3.0 (.12) 3.5 (.14)
2.8 (.11) 3.3 (.13)
2.6 (.10) 3.1 (.12)
J5
D E
3.0 (.12) 3.5 (.14)
2.8 (.11) 3.3 (.13)
2.6 (.10) 3.1 (.12)
C D E
3.2 (.13) 5.8 (.23)
3.0 (.12) 5.5 (.22)
3.0 (.12) 5.0 (.20)
2.8 (.11) 5.0 (.20)
2.5 (.10) 4.7 (.19)
Tool
SL
10 (0.39)
10 (0.39)
8 (.31)
8 (.31)
7.5 (.30)
Tool
SL
8 (.31)
8 (.31)
7.5 (.30)
SL
11.0 (.43)
11.0 (.43)
11.0 (.43)
10 (.39)
10 (.39)
98