Cml/Cmo; Copley Virtual Machine (Cvm); Indexer 2; Cpl - Copley Controls Xenus Plus Series User Manual

Xenus Plus User Guide

1.3: CML/CMO

Copley Motion Libraries (CML) and Copley Motion Objects (CMO) make CANopen or EtherCAT
network commissioning fast and simple. All network housekeeping is taken care of automatically by
a few simple commands linked into your application program. CML provides a suite of C++ libraries,
allowing a C++ application program to communicate with and control a drive over the CANopen
network. CMO provides a similar suite of COM objects that can be used by Visual Basic, .NET,
LabVIEW, or any other program supporting the Microsoft COM object interface.

1.4: Copley Virtual Machine (CVM)

Copley Virtual Machine (CVM) is an embedded virtual programmable controller used to download
Copley's Indexer 2 or CPL programs to Copley drives. It is accessed via CME and can be opened
from CME's main window.

1.5: Indexer 2

Copley's Indexer 2 is an indexer configured and programmed using the tools built into CME.

1.6: CPL

CPL is Copley's high level programming language for writing custom CVM programs. It expands on
the features of Indexer 2 with interrupts and features that are faster and more flexible, including
looping and branching capabilities.
Copley Controls
16-01344 Rev 06
13