Default; Print; Function Keys - Rigol MSO4000 User Manual

1 Quick Start

Default

Print

Function Keys

Measure: press this key to enter the measurement setting menu.

Acquire: press this key to enter the sample setting menu. Here, you can set the

acquisition mode, the memory depth, and the antialiasing function of the
oscilloscope.
Storage: press this key to enter the file store and recall interface. The file types

available include traces, waveforms, setups, picture and CSV. This instrument
supports internal/external storage as well as disk management.
Cursor: press this key to enter the cursor measurement menu. The oscilloscope

provides three cursor modes (manual, track and auto).
MSO4000/DS4000 User's Guide
Press this key and then press OK to restore the oscilloscope
to its default configuration.
Press this key to execute print function or save the screen
in the USB storage device. If the oscilloscope is currently
connected to a printer and the printer is in idle state, press
this key to execute print function. If no printer but a USB
storage device is currently connected, press this key to
save the screen to the USB storage device in ".bmp"
format. When printer and USB storage device are
connected at the same time, the printer enjoys higher
priority.
RIGOL
1-21