To Enable Ref Function; To Select The Reference Channel; To Select The Ref Source; To Adjust The Ref Waveform Display - Rigol MSO5000-E Series User Manual

RIGOL

To Enable Ref Function

Press Ref on the front panel to enable the reference waveform function, or enable
the touch screen and then tap the function navigation icon
corner of the screen to open the function navigation. Then, tap the "Ref" icon to
enable the reference waveform function.
When the Ref function is enabled, you can select a different color for each reference
waveform, set the source of each reference channel, adjust the vertical scale and
offset of the reference waveform, save the reference waveform to the internal or
external memory, and recall it when needed.
Note: When the horizontal timebase is set to XY, the reference waveform function is
disabled.

To Select the Reference Channel

Press Current, rotate the multifunction knob
waveform channel (Ref1-Ref10). You can also press Current continuously or enable
the touch screen to select the reference waveform channel. By default, Ref1 is
enabled.

To Select the Ref Source

Press Source, rotate the multifunction knob
waveform source (CH1-CH2, D0-D15, or Math1-Math4). You can also press Source
continuously or enable the touch screen to select the reference waveform source.
Note: Only the currently enabled channel can be selected as the source channel of
the reference waveform.

To Adjust the Ref Waveform Display

After pressing SaveToRef, you can adjust the vertical scale and offset of the
reference waveform specified under Current.
Press VScale, then rotate the multifunction knob
⚫
numeric keypad to set the vertical scale of the reference waveform. You can also
enable the touch screen and use the "Pinch & Stretch" gesture to adjust the
vertical scale.
12-2
Chapter 12 Reference Waveform
at the lower-left
to select the desired reference
to select the desired reference
or use the pop-up
MSO5000-E User Guide