7. SERVO CONFIGURATION SOFTWARE
7.4 Parameters
Click "Parameters" on the menu bar and click "Parameter List" on the menu.
When the above choices are made, the following window appears:
(1) Parameter value write ( a) )
Click the parameter whose setting was changed and press the "Write" button to write the new
parameter setting to the servo amplifier.
(2) Parameter value verify ( b) )
Click the "Verify" button to verify all parameter values being displayed and the parameter values of
the servo amplifier.
h)
7 - 4
a)
b)
c)
d)
e)
f)
g)