Station Setting - Mitsubishi Electric MELSERVO-J2-Super Series Instruction Manual

7. SERVO CONFIGURATION SOFTWARE

7.3 Station setting

Click "System" on the menu bar and click "Station Selection" on the menu.
When the above choices are made, the following window appears:
(1) Station number setting
Choose the station number in the combo box and click the "Station Settings" button to set the station
number.
(2) Closing of the station setting window
Click the "Close" button to close the window.
POINT
This setting should be the same as the station number which has been set
in the parameter in the servo amplifier used for communication.
7 - 3