Servo Configuration Software; Specifications; System Configuration - Mitsubishi Electric MELSERVO-J2-Super Series Instruction Manual

7. SERVO CONFIGURATION SOFTWARE

7. SERVO CONFIGURATION SOFTWARE
The Servo Configuration software (MR2JW3-SETUP152E) uses the communication function of the servo
amplifier to perform parameter setting changes, graph display, test operation, etc. on a personal
computer.

7.1 Specifications

Item
Communication signal
Baud rate
System
Monitor
Alarm
Diagnostic
Parameters
Test
Advanced-function
Program-data
File operation
Others

7.2 System configuration

(1) Components
To use this software, the following components are required in addition to the servo amplifier and
servo motor:
Model
(Note 2)
Personal computer
OS
Display
Keyboard
Mouse
Printer
Communication cable
Note 1: Windows and Windows NT are the registered trademarks of Microsoft Corporation in the United State and other countries.
2: On some personal computers, this software may not run properly.
POINT
Some functions of the Servo Configuration Software may be unusable
depending on the version. Contact us for more information.
Conforms to RS-232C
57600, 38400, 19200, 9600
Station selection
Display all High-speed monitor, trend graph
Display, history, amplifier data
I/O display, function device display, no motor rotation, total power-on time, software number
display, motor data display, tuning data, absolute encoder data, axis name setting
Parameter list, tuning, change list, detailed information, device setting
Jog, positioning, operation w/o motor, forced output, single-step feed.
Machine analyzer, gain search, machine simulation
Point table
Data read, save, print
Help display
IBM PC-AT compatible where the English version of Windows 95, Windows 98, Windows Me,
Windows NT Workstation 4.0 or Windows 2000 Professional operates
Processor: Pentium 133MHz or more (Windows 95, Windows 98, Windows NT Workstation 4.0,
Windows 2000 Professional)
Pentium 150MHz or more (Windows Me)
Memory: 16MB or more (Windows 95), 24MB or more (Windows 98)
32MB or more (Windows Me, Windows NT Workstation 4.0, Windows 2000 Professional)
Free hard disk space: 30MB or more
Serial port used
Windows 95, Windows 98, Windows Me, Windows NT Workstation 4.0, Windows 2000 Professional
(English version)
One whose resolution is 800 600 or more and that can provide a high color (16 bit) display.
Connectable with the above personal computer.
Connectable with the above personal computer.
Connectable with the above personal computer. Note that a serial mouse is not used.
Connectable with the above personal computer.
MR-CPCATCBL3M
When this cannot be used, refer to (3) Section 15.1.4 and fabricate.
Description
(Note 1) Description
7 - 1