Set Trigger Source; Trigger A Measurement; Sample Program : To Trigger A Measurement From Controller - Agilent Technologies 4396B Gpib Programming Manual

How can you wait for a
measurement to be
completed?
d
c
Figure 2-4. Sample Program : To Trigger a Measurement from Controller (2)

Set Trigger Source

Set the trigger source to bus.

Trigger a Measurement

Triggers the analyzer. When the trigger source is set to bus, you can use the group execution
trigger as follows:
What is Group
Execution Trigger
(GET)?
2-4 T riggering the Analyzer from Remote
When you want to return the measurement data to the
controller, you must wait for the measurement to be
completed. For details, see Chapter 3.
The BASIC command
command. The BASIC command is used to trigger all
triggerable instruments on a BUS at the same time.
Therefore, to trigger all triggerable instruments on select
code 7(GPIB bus) execute the command:
can be used instead of the
a
b