Agilent Technologies 4396B Gpib Programming Manual page 83

c b
Figure 11-7. Sample Program: File Transfer from 4396B to External Controller (2/2)
Lines 80 to 140 accept the entry of the source le name and the destination le name.
Line 160 calls the subprogram to transfer a le from the 4396B to the external controller.
Lines 250 to 290 prepare for writing to the destination le.
Lines 310 to 340 prepare for reading the source le to the external controller.
Line 370 executes the query command to read data.
Lines 380 to 400 read the part indicating the length of the xed length block data (see
Figure 11-8) to obtain the length of the data to be transferred.
Lines 420 to 470 check the data length. If the data length is 0, the transfer process is
terminated.
Using Application Programs 11-11