File Transfer from 4396B to External Controller
This program transfers a specied le in the current directory of the 4396B to the current
directory of the storage device connected to the external controller, giving a le name you
desire.
When executed, this program rst prompts you to enter a source le name, as shown below.
Enter the name of a le you want to transfer.
Then, the program prompts you to enter a destination le name as shown below(in this
example, SAMPLE.STA has been entered as the source le name). Enter the le name you
want to give on the storage device. Note that a le with the same name will be overwritten, if
it already exists.
d
a
Figure 11-7. Sample Program: File Transfer from 4396B to External Controller (1/2)
11-10
Using Application Programs